Globalsat LS-111 CO2 and...

Globalsat LS-111 CO2 and...

$374.00

Globalsat LS-111 LoRaWAN™ compliant CO2 and Temperature & Humidity indoor sensor with Australian firmware.

This device only works with AU spec gateways within the Australian ISM band 915-928MHz. Preconfigured and tested on channel 0-7, all other channels (8-63) are disabled, but can be enabled using a configuration tool. For developers only.

Compare

Product Description

  • High Receiver Sensitivity, long range solution
  • Integrated with calibrated CO2 sensor
    Accuracy: ±30 ppm, ±3% of reading
    Range: 0 ~ 10,000 ppm
  • Integrated with Compensated Temp/ RH sensor
  • Wide range DC power-in, 8~24V /or Micro-USB DC power-in, 5V
  • Display CO2 concentration, Temp/ RH

 

LoRa Module GlobalSat LM-130 LoRaWAN™ Module
RF Band 868/ 915 MHz
LoRa Antenna External Omni Antenna
824~960 MHz 2dBi SMA Male connector
Sensitivity -132 dBm @ 980bps
Tx Power Up to 100mW
Sensing Element
  • CO2: Gold-plated infrared (NDIR) wave-guide technology with Automatic Baseline Correction (ABC) and passive gas diffusion (no moving parts)
  • Temperature & Humidity: CMOS sensor
Response Time
  • CO2: < 10 sec. @ 30 cc/min. flow rate < 3 min. diffusion time
  • Temperature: min. 3 sec.;max. 30sec. atτ63%
  • Humidity: < 8 sec. atτ63%
Accuracy (at 25℃)
  • CO2: ±30ppm + (± reading *3%)
  • Temperature: ±0.3℃
  • Humidity: ±3 %RH
Repeatability
  • CO2: ± 20ppm + (±reading * 1%)
  • Temperature: ±0.1℃
  • Humidity: ±0.1 %RH
Zero Drift
  • CO2: < ± 10ppm/yr. with Automatic Baseline Correction (ABC)
  • Temperature: < 0.04 ℃/yr
  • Humidity: < 0.5 %RH/yr
Measurement Range*
  • CO2: 0 ~ 10,000ppm
  • Temperature: -40 ~ +125℃
  • Humidity: 0 ~ 95 %RH
Pressure Dependence CO2: 1.6% reading per kPa
Operation Temperature -10 ~ +60 ℃
Operation Humidity 0 ~ 95%RH, Non-condensing
Storage Temperature -20 ~ +70 ℃
Warm-up Time ≤ 1 min. (at full specs ≤ 15 minutes)
Dimension Wall-mount: 113.57(H) x 80(W) x 28.79(D) mm
Case Material ABS